Product Description
Operating procedures: 1. The operator must be familiar with the operation sequence and performance of the machine tool, and it is strictly forbidden to use the equipment with super performance. 2. The operator must pass the training, examination or assessment before taking up the post with a certificate. 3. Before starting the machine, fill in oil according to the equipment lubrication chart, and check whether the handles are placed in the specified positions. Press the master start button. . 4. Whether the variable shaft box is connected to the chuck and whether the motor and belt are loose. 5. Select a low speed gear, adjust the feed amount, and try the automatic feed after 10 minutes of idling 6. The feed exits, the main motor stops, and the main stop button is pressed. 7. Turn off the main switch of the electric control of the lathe, and turn off the air switch of the electric control cabinet. 8. Clean the guide rail surface of the lathe and inject oil according to the equipment lubrication chart. Safe operating procedures: 1. During processing, it is strictly forbidden to wear gloves, the workpiece should be clamped firmly, and it is strictly forbidden to use the hand-held workpiece for processing. 2. When the machine is turned on, the hand is not allowed to touch, turn, jam or measure. 3. The chuck can only be released when the workpiece is processed after the chuck stops within the rotation range during work. 4. Under the cross arm and on the workbench, no debris or obstacles are allowed. 5. When using automatic tool feed, the limit block should be adjusted, and the manual feed should not be used too much. 6. When there are long iron filings on the cutter head, stop and remove it with an iron hook. Wind blowing or blowing is prohibited.